Once the joint compound is dry, it’s time to start skim coating the ceiling. Next, you’ll need to fill any holes and seams in the ceiling with joint compound and allow it to dry thoroughly. To begin the process, you’ll need a drywall knife, a drywall trowel, a drill and mixing paddle, a bucket, joint compound and sandpaper.įirst, it’s important to prepare the area you’ll be working on by clearing away any furniture and other items. Skim coating a ceiling is a great way to get a smooth, consistent surface and can be done quite easily with a few basic tools. Can you skim coat over a textured ceiling? Once the second coat of paint is finished, your ceiling should be ready!. Apply two coats of paint and use a roller or brush to get each section evenly covered. It is best to use a latex or an oil-based paint with a flat finish to ensure that there are no shiny spots on the ceiling. Wipe the sanding dust off the spackled surface with a damp rag and then dry it off.Īfter the primer dries, you need to paint the ceiling. When finished, use a sanding block with 180-grit paper to even out any bumps or ridges. You will want your spackling mixture to be a bit thinner than it would be to fill in a more irregular surface. Once you have a smooth level surface, use a lightweight spackling compound and spread it on the ceiling with a putty knife. Use a vacuum if needed to help clear out the dust created by the sanding process.
Afterwards, you will want to use a large sanding pad to smooth out the ceiling. It’s important to cover the entire surface until you get a uniform coating. This will help to provide a base coat that can help to minimize imperfections or any additional irregularities that may have been caused by removing the popcorn texture. Start by using a primer specifically designed for ceilings and walls.
After scraping the popcorn off the ceiling, you must begin the process of priming and smoothing out the ceiling.
0 kommentar(er)
